Debian Wiki Ati Driver
If your card is on that list, you are limited to open-source drivers on Debian Squeeze/6.0 (and later). So, you have two options: 1) Downgrade from xserver 1.12 (Tested, and works on Debian Wheezy kernel 3.2.0-4-amd64
Multiple monitors on one card AND a monitor attached to VGA port. 2. I find it odd this all got added after Wheezy was released with 12.6,because I was here and posted the info,and this post wasnt here, Do you work for Nvidia? If the vendor string contains ATI, you have installed the driver successfully. Research is to be continued. https://wiki.debian.org/ATIProprietary
Debian Jessie Radeon Driver
Next step - check /var/syslog if there would be "atieventsd: Unable to bind control socket to /var/run/atieventsd.socket: Permission denied " - then it need be run by root. Read Me Second:SLEEP mode in Debian/testing kernel 3.2.0 amd-driver-installer-catalyst-12.10-x86.x86_64.run breaks sleeping mode(notebook hangs up after awaking and reboot without logging anything ). If you want to run the bleeding edge, it can be found here: http://support.amd.com/us/gpudownload/linux/Pages/radeon_linux.aspx?type=2.4.1&product=22.214.171.124.42&lang=English With the 12.6 beta version you will get a watermark in the lower right hand corner. Read this: http://ati.cchtml.com/show_bug.cgi?id=522 Apply this patch: http://pastebin.com/swpDj4FD I find it odd this all got added after Wheezy was released with 12.6,because I was here and posted the info,and this post wasnt
- So i first install last fglrx-atieventsd packet and over it amd-driver-installer-catalyst-12.10-x86.x86_64.run. ( Or first amd-driver-installer-catalyst-12.10-x86.x86_64.run and then manualy copy rest conf files from fglrx-atieventsd without overwriting.) Then start atieventsd: "service fglrx-atieventsd
- Skip the first command if it does not exist. $ sudo sh /usr/share/ati/fglrx-uninstall.sh $ sudo apt-get remove --purge fglrx fglrx_* fglrx-amdcccle* fglrx-dev* xorg-driver-fglrx If you plan on using open-source drivers, you
- To force the ATI driver to adopt changes made to xorg.conf, use the following command: $ sudo aticonfig --input=/etc/X11/xorg.conf --tls=1 Test your installation NOTE: if you don't reboot first, fglrxinfo gives
- asked 5 years ago viewed 11,755 times active 4 years, 7 months ago Blog New Kids on the Block: Understanding Developers Entering the Workforce Today Linked 9 How to upgrade intel
- Google-ing around leads to suggestions of adding external repositories, occasionally accompanied by stories of ruining their builds in various ways.
- To learn more, check out our Community, Support, and News and Blogs pages.
- Usage of "Hab" during conversations What is the area of this polygon?
- This information often can be found by running the affected program from the terminal and then copy-pasting the output as either a code block in your question or as a link
OpenGL renderer string: ATI Radeon HD 4200 Series (This line may be different depending on what graphics card you are using.) OpenGL version string: 3.3.10665 Compatibility Profile Context (This line may At the time of making this edit beta version 12.6 also works just fine. To avoid confusion with the Xorg configuration, you may want to delete /etc/X11/xorg.conf file and use the following command to have it generated (assuming 2 monitors per card): prompt$ aticonfig --initial https://wiki.debian.org/GraphicsCard See Debian Open Source Drivers.
Prerequisite Packages Install the prerequisite packages (names are based on Debian sid, older Debians may be different): $ sudo apt-get install build-essential cdbs fakeroot dh-make debhelper debconf libstdc++6 dkms libqtgui4 wget Firmware-linux-nonfree Content is available under Public Domain unless otherwise noted. ATTENTION RADEON USERS NOTE: If you enter your card information on AMD/ATI's driver page, it will offer you the Catalyst 9-3 driver to download. Removing Catalyst/fglrx The uninstall script in the first command will only exist if you downloaded the drivers and installed them directly (rather than building packages as this guide does).
Debian Jessie Fglrx
If this happens, check if the log file /var/log/Xorg.0.log contains an entry like this one: (II) fglrx(0): Cannot get EDID information for CRT1 ...which may be followed later with: (II) fglrx(0): https://wiki.debian.org/it/AtiHowTo Wheezy upgraded from xserver 1.11 to 1.12 on May 20, 2012.< you posted about something a year before LMAO
See the complete list here. his comment is here Use the following as a starting point: Section "ServerLayout" Identifier "amdconfig Layout" Screen 0 "amdconfig-Screen-0" 0 0 EndSection Section "Module" EndSection Section "Monitor" Identifier "0-DFP6" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Before Starting If you have previously attempted installing Catalyst, remove any leftover files by following the Removing the Driver section. Installation The open-source ati/radeon driver should already be installed and used as the default. Debian Amdgpu
This guide focuses on installing the proprietary ATI driver (fglrx/Catalyst). After you have everything working properly run this script: http://www.areyoueye.net/scripts/watermark_nix.sh It will get rid of that water mark. Installing this driver will not show up the watermark 2) Patch libpciaccess (I have no first hand knowledge of this working but others swear by it) This will get you the http://alladinsys.com/debian-jessie/debian-wiki-ati-drivers.php Good news is that many 3d games are well playing with sound on wine-1.5.6.
It is entirely dependent on your configuration. Xserver-xorg-video-radeon Clean install amd-driver-installer-catalyst-12.10-x86.x86_64.run on Debian/testing kernel 3.2.0 i386. Using fglrxinfo on a system with Catalyst 11-4 and a RadeonHD 4250 returns: display::0.0 screen: 0 OpenGL vendor string: ATI Technologies Inc.
If you tried to install Catalyst on a system with one of these cards, see the 'Removing the Driver' section to restore the default/pre-installed drivers.
However, the Catalyst 9-3 driver doesn't support X servers past 1.5, and it will not work with Debian versions later than Lenny/5.0.x!!!!SO BE CAREFUL!!! For multiple monitors, instead try specifying all monitors in your xorg.conf file. But after upgrading libxi6 to stable version (apt-get install -t stable libxi6). Debian Stretch Fglrx UPDATE new poster 13.4 is in the Debian testing repo for 5000 and above cards, 13.1 is also in the Debian repo for older cards fglrx-driver_12-6+point-1_i386.deb is shipped with Debian stable/Wheezy
Here follows the entirety of a minimal xorg.conf file for the Radeon 6870: Section "Device" Identifier "ATI radeon 6870" Driver "fglrx" EndSection X2/Dual GPU Cards If you have an X2 card After this sleeping mode become work correctly but only sometimes. Unfortunately fglrx/Catalyst trigger segfaults in Xorg newer than 1.11.x, and the driver was removed from Wheezy and Sid. http://alladinsys.com/debian-jessie/debian-ati-driver.php A possible work-around is to not use the VGA connector (CRT-1) on the first card at all and use only the DVI and HDMI port (possibly with a HDMI-to-DVI adapter cable)
Note 1: In the linked directions they use fglrx version 12.4. I suppose it is because atievetsd not working correctly. The ATI Radeon 9500-9800, Xpress200-1250, 690G, 740G, X300-X2500 (including Mobility RadeonHD 2300, since it is really a DirectX 9 part). Debian From cchtml.com Jump to: navigation, search Contents 1 Read Me First 2 Read Me Second:SLEEP mode in Debian/testing kernel 3.2.0 3
In this case you must execute: mkdir ati cd ati sudo apt-get build-dep fglrx-driver sudo apt-get source fglrx-driver cd fglrx-driver-* Edit file `debian/rules.defs` and adds 19 into XORG_ABI_LIST list. UPDATE: It seems it works correctly. Minimal Config A very basic /etc/X11/xorg.conf file might be what you need if you have a new card that's not fully supported by amdconfig. However you can manually install the 13.11 beta 6 version. [Note: As of 2016-02-27, fglrx packages appear in Jessie repos.] mkdir ati cd ati apt-get build-dep fglrx-driver apt-get -b source fglrx-driver